SKU: N/AThis site contains affiliate links for which we may be compensated
Toys & Hobbies / Radio Control & Control Line / RC Model Vehicle Parts & Accs / Other RC Parts & Accs
E-flite 60-Amp Pro Switch-Mode V2 BEC Brushless ESC This is the E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC V2. This ESC is high-quality, efficient, sensorless and has an integrated Switch-Mode BEC. It is capable of up to 60 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage. It has advanced programmable features such as low voltage cutoff, braking, timing and throttle input range. Features: Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds) 5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required) Stronger BEC for support of most 3-axis stabilization systems Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage Finned heat sinks Programmable motor braking Safe power-arm mode prevents accidental starts Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms) Programmable soft start for helis and airplanes Auto motor shut down if signal is lost or there is interference Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors Utilizes new smaller MOSFET technology to minimize weight Radio system power on/off switch Pre-wired connectors—E-flite EC3 connector on battery input and 3.5mm gold bullet connectors on motor output leads Specifications: Continuous Maximum Current: 60AInput Connector Types: 13 AWG with E-flite® EC3™ connectorOutput Connector Types: 13 AWG with 3.5mm gold bullet connectorsMomentary Peak Current: 15 sec @ 75A with proper cooling air flowLength: 2.85 in (73.0mm)Width: 1.30 in (33.0mm)Height: 0.61 in (15.5mm)Weight: 2.65 oz (75.0 g)Cells w/BEC: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd E-flite 60-Amp Pro Switch-Mode V2 BEC Brushless ESC This is the E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC V2. This ESC is high-quality, efficient, sensorless and has an integrated Switch-Mode BEC. It is capable of up to 60 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage. It has advanced programmable features such as low voltage cutoff, braking, timing and throttle input range. Features:
Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)
Stronger BEC for support of most 3-axis stabilization systems
Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
Finned heat sinks
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
Programmable soft start for helis and airplanes
Auto motor shut down if signal is lost or there is interference
Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
Utilizes new smaller MOSFET technology to minimize weight
Radio system power on/off switch
Pre-wired connectors—E-flite EC3 connector on battery input and 3.5mm gold bullet connectors on motor output leads